77-211 - Conditions for application of bulk regulations to entire zoning lot

LAST AMENDED
12/5/1990


Whenever a #zoning lot# existing on December 15, 1961, or on any applicable subsequent amendment thereto, is divided by a
boundary between:
(a)    two #Residence Districts# limited to #single-# or #single-# and #two-family residences#; or

(b)    two #Commercial Districts# or two #Manufacturing Districts# in which the same #uses# are permitted but different
        #bulk# regulations apply;

the #bulk# regulations applicable to the district in which more than 50 percent of the #lot area# of the #zoning lot# is located
may apply to the entire #zoning lot#, provided that the greatest distance from the mapped district boundary to any #lot line# of
such #zoning lot# in the district in which less than 50 percent of its area is located does not exceed 25 feet. Such distance shall be
measured perpendicular to the mapped district boundary.

Whenever the #bulk# regulations are so applied, the district boundary may be assumed to be relocated accordingly, and the off-
street parking and loading and all other regulations applying to such expanded district shall apply to the entire #zoning lot#.

Except as specifically provided by the provisions of a Special Purpose District, the provisions of this Section shall apply to
#zoning lots# that are divided by a Special Purpose District boundary line.