73-211 - Production uses

LAST AMENDED
6/6/2024


In all #Commercial Districts# and #Manufacturing Districts#, the Board of Standards and Appeals may permit modifications to
#uses# listed under Use Group X, as set forth in Sections 32-20 and 42-20 (Use Group X – Production Uses), pursuant to
paragraph (a) of this Section, provided that the findings in paragraph (b) are met.

(a)   For #uses# listed under Use Group X, other than those #uses# for which another permit exists pursuant to Section 73-21,
      inclusive, the Board may permit:

      (1)     modifications to a size limitation, denoted in the Use Group table with an “S”, provided that the increase does not
              exceed 200 percent of the amount set forth in Use Group X;

      (2)     modifications to supplementary #use# regulations, including enclosure and location within #buildings#
              provisions; or

      (3)     modifications to additional conditions, denoted in the Use Group table with a “P”, including environmental
              standards, geographic limitations, or other measures.

(b)    In order to grant such permit, the Board shall find that:

      (1)     such #use# will not impair the character or the future use or development of the surrounding area;

      (2)     such #use# will not create or contribute to serious traffic congestion and will not unduly inhibit surface traffic
              and pedestrian flow; and

      (3)     the modifications are necessary to support the operation of such #use#.

The Board may prescribe appropriate conditions and safeguards to minimize adverse effects on the character of the surrounding
area.