42-00 - GENERAL PROVISIONS

LAST AMENDED
12/5/2024


In order to carry out the purposes and provisions of this Resolution, the #uses# within #buildings or other structures# as well as
the open #uses# of #zoning lots#, or portions thereof, have been classified and combined into 10 separate Use Groups with
similar characteristics. For the purposes of establishing permitted #uses# in this Resolution, references to permitted #uses# in
the Use Groups, or any sub-categories therein, shall include all #accessory# #uses# thereto. Use Groups I, II, III, IV, V, VI, VII,
VIII, IX and X, are permitted in #Manufacturing Districts# subject to the provisions of the following Sections:

(a)    Sections 42-11 (Use Group I – Agriculture and Open Uses) through 42-20 (Use Group X – Production Uses) establish
       general #use# allowances in Use Groups I through X, including each #use# listed separately therein, by #Manufacturing
       District#, and additional provisions for certain #uses#, where applicable.

(b)    Section 42-30 (SPECIAL PROVISIONS APPLICABLE TO CERTAIN AREAS AND DISTRICTS) sets forth special
       provisions applicable to certain #Manufacturing Districts#, including:

       (1)    M1-1D, M1-2D, M1-3D, M1-4D and M1-5D Districts, as set forth in Section 42-311 (Residential uses in M1-1D
              through M1-5D Districts);

       (2)    M1-6D Districts, as set forth in Section 42-312 (Use regulations in M1-6D Districts);

       (3)    M1-5M and M1-6M Districts, as set forth in Section 42-313 (Use regulations in M1-5M and M1-6M Districts);

       (4)    M1-1, M1-5 and M1-6 Districts in certain areas, as set forth in Section 42-314 (Use regulations in certain M1-1,
              M1-5 and M1-6 Districts);

       (5)    M1-5B Districts, as set forth in Section 42-315 (Use regulations in M1-5B Districts); and

       (6)    #Manufacturing Districts# with an A suffix, as set forth in Section 42-326 (Use regulations in Manufacturing
              Districts with an A suffix).

(c)    Section 42-40 (PERFORMANCE STANDARDS) establishes performance standards that are applicable to certain
       #uses# listed in Use Groups I, IV, VI, VIII, IX and X.

(d)    Section 42-50 (SUPPLEMENTARY USE REGULATIONS) sets forth supplementary #use# regulations and special
       provisions applying along district boundaries, including:

       (1)    enclosure of commercial or manufacturing activities, as set forth in Section 42-51;

       (2)    enclosure or screening of storage, as set forth in Section 42-52; and

       (3)    limitations on business entrances, show windows or #signs#, as set forth in Section 42-53.

(e)    Section 42-60 (SIGN REGULATIONS), inclusive, sets forth regulations for permitted #signs#.

The #use# provisions of this Chapter may be modified or superseded by special rules for certain areas in Article I (General
Provisions), Article VI (Special Regulations Applicable to Certain Areas), and through Special Purpose Districts.