24-50 - HEIGHT AND SETBACK REGULATIONS

LAST AMENDED
12/5/2024

R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12

In all districts, as indicated, the height and setback regulations of this Section 24-50, inclusive, shall apply as follows.

Height and setback regulations applicable to R1 through R5 Districts, except R5D Districts, are set forth in Section 24-521
(Front setbacks in districts where front yards are required). In R5D Districts, all #buildings or other structures# shall comply
with the applicable height and setback requirements set forth in Section 23-40 (HEIGHT AND SETBACK REGULATIONS),
inclusive.

In R6 through R12 Districts with a letter suffix, the height and setback regulations of Section 23-43 (Height and Setback
Requirements in R6 Through R12 Districts), inclusive, shall be applied to all #buildings# in accordance with the applicable
#Residence District# regulations, pursuant to Section 24-04 (Applicability of Article II, Chapter 3 Regulations). For other
#buildings# in R6 through R12 Districts without a letter suffix utilizing the provisions of this Chapter, height and setback
regulations are set forth in Sections 24-522 (Front setbacks in districts where front yards are not required), 24-53 (Alternate
Front Setbacks) and 24-54 (Tower Regulations), as applicable.

In all districts, supplemental provisions are set forth in Sections 24-55 (Required Side and Rear Setbacks), 24-56 (Special Height
and Setback Provisions for Certain Areas), 24-57 (Modifications of Height and Setback Regulations), 24-58 (Special Provisions
for Zoning Lots Divided by District Boundaries) and 24-59 (Special Height Limitations), respectively.