138-24 - Height and Setback Regulations in M1 Districts Paired With an R9 or R10 District

LAST AMENDED
12/5/2024


In M1 Districts paired with an R9 or R10 District, the applicable #street wall# location and minimum base height provisions of
paragraph (b) of Section 138-22 (Street Wall Regulations) shall apply, and the applicable maximum height of #buildings or other
structures# and setback provisions set forth in Section 123-66 (Height and Setback Regulations), inclusive, shall apply as
modified in this Section.

(a)   In M1 Districts paired with an R9 District, at a height not lower than the minimum base height set forth in Section 138-
       22, nor higher than a maximum base height of 105 feet, a setback shall be provided in accordance with Section 23-433
       (Standard setback regulations). The maximum #building# height shall be 215 feet;

(b)    in M1 Districts paired with an R10 District whose maximum #floor area ratio# is 10.0, at a height not lower than the
        minimum base height set forth in Section 138-22, nor higher than a maximum base height of 155 feet, a setback shall be
        provided in accordance with Section 23-433. The maximum #building# height shall be 275 feet; and

(c)   in M1 Districts paired with an R10 District whose maximum #floor area ratio# is 12.0, at a height not lower than the
       minimum base height set forth in Section 138-22, nor higher than a maximum base height of 155 feet, a setback shall be
       provided in accordance with Section 23-433. The maximum #building# height shall be 295 feet.