123-65 - Special Height and Setback Regulations in Special Mixed Use Districts With R6
Through R12 District Designations

LAST AMENDED
12/5/2024

In #Special Mixed Use Districts# where the designated #Residence District# is an R6 through R12 District, the #street wall#
location of a #building# shall be as set forth in 123-651 (Street wall location for all buildings), and the height and setback
regulations of a #building or other structure# shall be as set forth in Section 123-652 (Special base and building heights).
Additional height and setback provisions are set forth in Section 123-653 and Section 123-66, inclusive.

Permitted obstructions shall be permitted pursuant to Sections 23-41, 24-51 or 43-42. In addition, for all #buildings or other
structures#, a dormer may be provided in accordance with the provisions of paragraph (b)(1) of Section 23-413 (Permitted
obstructions in certain districts).

The height of all #buildings or other structures# shall be measured from the #base plane#. For the purposes of this Section,
where #base planes# of different elevations apply to different portions of a #building or other structure#, each such portion of
the #building# may be considered to be a separate #building#.