119-212 - Height and setback regulations

LAST AMENDED
12/5/2024


The underlying height and setback regulations shall be modified by the provisions of this Section.

No portion of a #building or other structure# shall penetrate a plane drawn parallel to the #base plane# at a height that is shown
in Table III of this Section. For #buildings# with pitched roofs, height shall be measured to the midpoint of such pitched roof.
For the purposes of this Section, the #base plane#, which is a plane from which the height of a #building or other structure# is
measured in R2X, R3, R4 and R5 Districts, shall also be established in accordance with the provisions of Section 12-10
(DEFINITIONS) for #buildings or other structures# in R1, R2 and R6 Districts.

TABLE III
MAXIMUM HEIGHT OF A BUILDING OR OTHER STRUCTURE


                         #Residence District# *                           Maximum Height above #Base
                                                                                                     Plane#
                                                                                                     (in feet)


                         R1 R2 R3 R4                                                                       36


                         R4                                                                                45


                         R5                                                                                60


                         R6                                                                                70




                *    or #Residence District# equivalent when the #zoning lot# is located within a #Commercial District#